4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Removal
POWER OUTLETS (INT): POWER OUTLET SOCKET (for Front): REMOVAL
1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
3. REMOVE HEATER CONTROL ASSEMBLY See: Heating and Air Conditioning/Control Assembly/Service and Repair/Removal
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 1GR-FE) See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A) See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 2TR-FE) See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for 1GR-FE) See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for 2TR-FE) See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
9. REMOVE NO. 2 CONSOLE BOX RETAINER See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Removal
10. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
11. REMOVE POWER POINT SOCKET ASSEMBLY
(a) Using a screwdriver, detach the claw and remove the power point socket.
HINT
Tape the screwdriver tip before use.
12. REMOVE POWER POINT SOCKET COVER
(a) Detach the 2 claws and remove the socket cover.