4 Runner 2WD L4-2.7L (2TR-FE) (2010)
/Page-1067001.png)
Camshaft Position Sensor: Service and Repair
Installation
2TR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION
1. INSTALL CAMSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring of the camshaft position sensor.
(b) Install the camshaft position sensor with the bolt.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
NOTICE:
Make sure that the O-ring is not cracked or jammed when installing it.
(c) Connect the camshaft position sensor connector.
