4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Installation
SEAT: POWER SEAT SWITCH: INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT
*
Use the same procedure for the RH and LH sides.
*
The procedure listed below is for the LH side.
1. INSTALL FRONT POWER SEAT SWITCH LH
(a) Connect the power seat switch connector.
(b) Install the power seat switch with the 3 screws.
2. INSTALL FRONT SEAT CUSHION SHIELD LH See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Reassembly
3. INSTALL RECLINING POWER SEAT SWITCH KNOB See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Power Seat)/Reassembly
4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly (for Power Seat)/Reassembly
5. INSTALL FRONT SEAT ASSEMBLY
(a) Install the front seat assembly See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Installation.