4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Installation
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER
(a) Install the receiver assembly with the bolt.
Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
(b) Connect the connector.
2. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
3. PERFORM REGISTRATION OF TRANSMITTER ID
(a) Perform registration of the transmitter ID See: Testing and Inspection/Programming and Relearning.