4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Torque Converter: Testing and Inspection
A343E AUTOMATIC TRANSMISSION / TRANSAXLE: TORQUE CONVERTER CLUTCH AND DRIVE PLATE: INSPECTION
1. INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY
(a) Inspect the 1-way clutch.
(1) Install SST to the inner race of the 1-way clutch.
SST : 09350-32014
09351-32010
(2) Set SST so that it fits in the notch of the converter hub and in the outer race of the 1- way clutch.
SST : 09350-32014
09351-32020
(3) With the torque converter standing on its side, check that the clutch locks when SST is turned counterclockwise and rotates freely and
smoothly when SST is turned clockwise.
(4) If the results are not as specified, clean the converter and recheck the 1-way clutch.
If the results still are not as specified even after cleaning the converter, replace the converter.
(b) Determine the condition of the torque converter clutch.
(1) Check that the following conditions are met: