4 Runner 2WD L4-2.7L (3RZ-FE) (1996)
Idle Speed: Testing and Inspection
1. INITIAL CONDITIONS
-
Engine at normal operating temperature
-
Air cleaner installed
-
All pipes and hoses of air induction system connected
-
All accessories switched OFF
-
All vacuum lines properly connected
HINT: All vacuum hoses for EGR system, etc. should be properly connected.
-
MFI system wiring connectors fully plugged
-
Ignition timing check correctly
-
Transmission in neutral position
2. CONNECT TOYOTA HAND-HELD TESTER OR OBD II SCAN TOOL
-
Connect the TOYOTA hand-held tester or OBD II scan tool to the DLC3.
-
Please refer to the operation manual for further details.
3. INSPECT IDLE SPEED
-
Race the engine speed at 2,500 rpm for approx. 90 seconds.
-
Check the idle speed.
idle speed: 650 - 750 rpm
-
If the idle speed is not as specified, check the IAC valve, intake air leakage and MFI system.
4. DISCONNECT TOYOTA HAND-HELD TESTER OR OBD II SCAN TOOL