4 Runner 2WD L4-2.7L (3RZ-FE) (1996)
/Page-58002.png)
-
If the resistance is not as specified, replace the ECT sensor.
4. REINSTALL ECT SENSOR
-
Using a 19 mm deep socket wrench, install the ECT sensor and gasket.
Torque: 25 N.m (250 kgf.cm, 18 ft.lbf)
-
Connect the ECT sensor connector.
-
Install the engine wire protector to the 3 brackets.
5. REFILL ENGINE COOLANT
