4 Runner 2WD L4-2.7L (3RZ-FE) (1996)
/Page-1121002.png)
b. Remove the nut, washers and bolt from the frame and disconnect the lateral control rod.
Installation Hint: After stabilizing the suspension, tighten the nut to 86 Nm (64 ft. lbs.).
c. Remove the nut and washers from the rear axle housing, and remove the lateral control rod.
Installation Hint: After stabilizing the suspension, tighten the nut to 86 Nm (64 ft. lbs.).
4. Installation is in the reverse order of removal.
