4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Crankshaft Main Bearing: Service and Repair
Removal
REMOVE MAIN BEARING CAPS
(a)
Uniformly loosen and remove the 10 main bearing cap bolts in several passes, in the sequence shown.
(b) Using the removed main bearing cap bolts, pry the main bearing cap back and forth, and remove the main bearing caps, lower bearings and
(No. 3 main bearing cap only) lower thrust washers.
NOTE:
-
Keep the lower bearing and main bearing cap together.
-
Arrange the main bearing caps and lower thrust washers in the correct order.
