4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
4. Inspect the toe-in, the toe-in (total) should be as follows.
Measuring Point Reference
^
A+B: 0°12' ± 12' (0.2° ± 0.2°).
^
C-D: 2 ± 2 mm (0.08 ± 0.08 inch).
NOTE: If the toe-in is not within the specification, adjust the rack ends.
5. Inspect the wheel angle by doing the following. Turn the steering wheel fully, and measure the turning angle.
Inside Wheel: 35°(33°-36°).
Outside Wheel(Reference): 31°.
NOTE: If wheel angle deviates from the specifications, readjust the toe-in and wheel angle within the specifications. At this time, the lengths of
the tie rod end may be within less than 1.5 mm (0.059 inch).