4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Circuit Opening Relay: Testing and Inspection
INSPECTION
1. Remove lower finish No.1 panel.
2. Remove circuit opening relay.
3. Inspect circuit opening relay.
(a) Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
(b) Check that there is no continuity between terminals 3 and 4.
If there is continuity, replace the relay.
(c) Apply battery positive voltage across terminals 1 and 2.
(d) Using an ohmmeter, check that there is continuity between terminals 3 and 4.
If operation is not as specified, replace the relay.
4. Reinstall circuit opening relay.
5. Reinstall lower finish No.1 panel.