4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Air Bag Control Module: Testing and Inspection
Tc Terminal Circuit
Tc Terminal Circuit
CIRCUIT DESCRIPTION
By connecting terminal Tc and E1 of the DLC1 the airbag sensor assembly is set in the DTC output mode. The DTC's are displayed by the
blinking of the SRS warning light.
If the DTC is not displayed, do the following troubleshooting.
If the DTC is displayed without a DTC check procedure, perform the following troubleshooting.
WIRING DIAGRAM
INSPECTION PROCEDURE
Step 1
