4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Resistance: Refer to the chart graph.
If the resistance is not as specified, replace the ECT sensor.
4. Reinstall ECT sensor.
(a) Using a 19 mm deep socket wrench, install the ECT sensor and gasket.
Torque: 25 N.m (250 kgf.cm, 18 ft.lbf)
(b) Connect the ECT sensor connector.
(c) Install the engine wire protector to the 3 brackets.
5. Refill engine coolant.
