4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Knock Sensor: Service and Repair
KNOCK SENSOR REMOVAL AND INSTALLATION
REMOVAL
1. Remove starter.
2. Remove fuel filter set bolts.
3. Remove knock sensor.
(a) Disconnect the knock sensor connector.
(b) Using SST, remove the knock sensor. SST 09816-30010
INSTALLATION
1. Reinstall knock sensor.
(a) Using SST, install the knock sensor. SST 0981630010
Torque: 44 N.m (450 kgf.cm, 33 ft.lbf)
(b) Connect the knock sensor connector.
2. Reinstall fuel filter set bolts.
Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)
3. Reinstall starter.
