4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Transmission Temperature Sensor/Switch: Service and Repair
REPLACEMENT
1. Disconnect ATF temperature sensor connector.
2. Remove ATF temperature sensor.
a. Remove the ATF temperature sensor.
b. Remove the O-ring from the ATF temperature sensor.
3. Install ATF temperature sensor.
a. Coat a new Wring with ATF and install it to the ATF temperature sensor.
b. Install the ATF temperature sensor.
Torque: 15 N.m (11 ft. lbs.)
4. Connect ATF temperature sensor connector.
INSTALLATION NOTICE: Be careful not to twist the wire harness.