4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
16. Install the two turn pressure tubes, performing the following.
a. Install a new union seat to the rack housing and control valve housing.
b. Using the 09633-00020 SST, install the tube, tightening it to 20 Nm (15 ft. lbs.).
NOTE:
^
Use a torque wrench with a fulcrum length of 300 mm (11.81 inch).
^
This torque value is effective in case that SST is parallel to a torque wrench.
