toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering Effort Measurement|Page 6992 > < Steering Wheel Nut - Torque Standardization|Page 6989
Page 1
background image

Steering Wheel: Testing and Inspection
Steering Effort Measurement

 

Check the steering effort by doing the following.
a. Center the steering wheel.
b. Remove the steering wheel pad. 
c. Start the engine and run it at idle.
d. Measure the steering effort in both directions. The reference measurement is 4.9 Nm (43 inch lbs.).

NOTE: Be sure to consider the tire type, pressure and contact surface before making your diagnosis.

e. Tighten the steering wheel set nut to 34 Nm (25 ft. lbs.).
f.

Install the steering wheel pad.

Steering Effort Measurement|Page 6992 > < Steering Wheel Nut - Torque Standardization|Page 6989