4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Torque: 86 N.m (800 Kgt.cm, 64 Ft.lbf)
8.
Connect the Stabilizer Bar Links. Connect the stabilizer bar links to the stabilizer bar and attach the two nuts.
Torque: 69 N.m (700 Kgf.cm, 51 Ft.lbf)
9.
Connect the Rear Shock Absorbers.
a.
Connect the rear shock absorbers to the rear axle housing. Attach the two bushings, washers and bolt.
Torque: 65 N.m (650 Kgt.cm, 47 Ft.lbf)
b.
Attach the opposite side using the same procedure.
10.
Replace the Spring Bumpers.
a.
Remove the two bolts and spring bumpers from the frame.
b.
Install two new spring bumpers onto the frame with the two bolts.
Torque: 13 N.m (130 Kgf.cm, 9 Ft. lbf)
11.
Install the rear wheels and torque the lugnuts.
Torque: 110 N.m (1,150 Kgt.cm, 83 Ft.lbf)
12.
Lower the vehicle.
