4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
b. And then install the flange, the rounded edge facing downward.
HINT: There are 8 different thicknesses for the flange.
c. Install the snap ring with a screwdriver. Be sure the end gap of the snap ring is not aligned with the cutout portion of the forward clutch drum.
7. Check pack clearance of forward clutch.
Using SST 09350 - 30020 (09350 - 06120) and a dial indicator, measure the forward clutch piston stroke while applying and releasing compressed
air (392 - 785 kPa, 57 - 114 psi).
Pack clearance: 0.5-0.9 mm (0.020-0.035in.)
If the values are non-standard, inspect the discs.
8. Install direct clutch to forward clutch.
a. Make sure that the thrust washer is installed to the direct clutch drum.
b. Align the flukes of discs in the direct clutch.
c. Install the direct clutch onto the forward clutch.
