4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
1. Remove direct clutch drum from forward clutch.
2. Remove clutch drum thrust washer from direct clutch.
3. Check piston stroke of direct clutch.
a. Place the direct clutch assembly onto the O/D support assembly.
b. Using SST 09350 - 30020 (09350 - 06120) and a dial indicator, measure the direct clutch piston stroke while applying and releasing
compressed air (392 - 785 kPa, 57 - 114 psi).
Piston stroke: 1.37 - 1.60 mm (0.0359 - 0.0630 in.)
If the values are non-standard, inspect the discs.
4. Remove flange, plates and discs.
a. Using a screwdriver, remove the snap ring from the direct clutch drum.
b. Remove the flange, plates and discs.
