4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
3. Check direct clutch drum bushing.
Using a dial indicator, measure the inside diameter of the clutch drum bushing.
Maximum inside diameter: 53.99 mm (2.1256 in.)
If the inside diameter is greater than the maximum, replace the clutch drum.
DIRECT CLUTCH ASSEMBLY
1. Install direct clutch piston to direct clutch drum.
Coat new O-rings with ATF and install them on the direct clutch piston.
Being careful riot to damage the O-rings, press in the direct clutch piston into the clutch drum with both hands.
2. Install piston return spring.
a. Install the piston return spring.
b. Place SST 09350 - 30020 (09350 - 07040) on the spring retainer, and compress the return spring with a shop press.
c. Install the snap ring with snap ring pliers. Be sure the end gap of the snap ring is not aligned with the spring retainer.
