4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
If the piston stroke is non-standard, select another flange.
HINT: There are 8 different thicknesses for the flange.
5. Install clutch drum thrust washer.
-
Coat the thrust washer with petroleum jelly and install it onto the direct clutch.
6. Install direct clutch to forward clutch.
a. Align the flukes of discs in the direct clutch.
b. Install the direct clutch onto the forward clutch.
c. Check that the distance from the direct clutch end to the forward clutch end is 71.2 mm (2.803 in.). If the distance is less than the above value,
parts may have been assembled incorrectly. check and reassemble again.
Forward Clutch
NOTE: For removal and installation procedures refer to "Automatic Transmission/Transaxle, Service and Repair."
FORWARD CLUTCH DISASSEMBLY
