4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
1. Remove forward clutch assembly from direct clutch assembly.
2. Place forward clutch onto overdrive support.
Place wooden blocks or similar, to prevent forward clutch shaft from touching the work stand, and place the O/D support on them.
b. Place the forward clutch onto the O/D support.
3. Check pack clearance of forward clutch.
Using Special Service Tool (SST) 09350 - 30020 (09350 - 06120) or equivalent, and a dial indicator, measure the forward clutch piston stroke
while applying and releasing compressed air (392 - 785 kPa, 57-114 psi)