4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
8. Remove o-ring from forward clutch drum.
9. Remove 3 oil seal rings forward clutch inspection.
FORWARD CLUTCH INSPECTION
1. Inspect disc, plate and flange.
Check to see if the sliding surface of the disc, plate and flange are worn or burnt. If necessary, replace them.
HINT:
-
If the lining of the disc is peeling off or discolored, or even if a part of the printed numbers are defaced, replace all discs.
-
Before assembling new discs, soak them in ATF for at least 15 minutes.
2. Check forward clutch piston.
a. Check that the check ball is free by shaking the piston.
b. Check that the valve does not leak by applying low- pressure compressed air.
