4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Clutch Master Cylinder: Service and Repair
REMOVAL
1. Draw out fluid with syringe.
2. Disconnect clutch line.
Using Special Service Tool (SST) 09023 - 00100, disconnect the line. Use a container to catch the fluid.
Torque: 15 N.m (11 ft. lbs.)
3. Remove clip and clevis pin.
4. Remove 2 mounting nuts and pull out master cylinder.
Torque: 13 N.m (9 ft. lbs.)
DISASSEMBLY
1. Remove reservoir tank.
a. Using a pin punch and hammer, drive out the slotted spring pin.
b. Remove the reservoir tank and grommet.