4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
l.
Apply Part No.08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent adhesive to the plug threads.
m. Using a hexagon wrench, install and tighten the screw plugs to 22 Nm (16 ft. lbs.).
24. If the vehicle has a differential lock, measure the distance between the sleeve and tip of the differential case end side when the differential is free
and locked. The standard distances are as follows.
^
LOCK: 17.44 - 18.86 mm (0.6866 - 0.7425 inch).
^
FREE: 32.40 - 33.90 mm (1.2756 - 1.3346 inch).
25. Install the indicator switch with a new gasket, tightening it to 40 Nm (30 ft. lbs.).
26. Install the actuator, performing the following procedures.
a. Check that the outermost rack tooth of the shift fork is virtually above the center line of the actuator installation hole.
b. Ensure that the matchmarks of the pinion of the actuator is in the extent between 0 and 5° clockwise above the center line of the actuator.
