4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
3. Install snap ring.
a. Select a snap ring that will allow minimum axial play.
b. Using a snap ring expander, install the snap ring.
4. Inspect 3rd gear thrust clearance.
5. Install 2nd gear and No.1 clutch hub.
a. Apply gear oil to the shaft and needle roller bearing.
b. Place the synchronizer ring on the gear and align the ring slots with the shifting keys.
c. Install the needle roller bearing in the 2nd gear.
d. Using a press, install the 2nd gear and No.1 clutch hub.
6. Inspect 2nd gear thrust clearance.
7. Install locking ball and 1st gear assembly.
a. Install the locking ball in the shaft.