4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
d. Turn the reverse synchronizer pull ring and separate the pull ring and cone ring.
e. Remove the 3 shifting keys and key springs by carefully levering up the shifting key spring with one screwdriver and levering the shifting key
away from the reverse synchronizer ring with another screwdriver.
INSPECTION
1. Inspect counter 5th gear radial clearance.
a. Install the spacer, counter 5th gear and needle roller bearing to the counter gear.
b. Using a dial indicator, measure the counter 5th gear radial clearance.
Standard clearance: 0.009-0.060 mm (0.0004-0.0024 inch)
Maximum clearance: 0.150 mm (0.0059 inch)
If the clearance exceeds the maximum, replace the counter gear or needle roller bearing or counter 5th gear.
2. Inspect counter gear.
Using a micrometer, measure the outer diameter of the counter shaft journal.
Minimum diameter:
Part A: 26.975 mm (1.0620 inch)
Part B: 29.950 mm (1.1791 inch)
If the outer race is less than the minimum, replace the counter gear.
