4 Runner 2WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1992)
/Page-239001.png)
Connecting Rod: Service and Repair
Oil Clearance
3. REMOVE CONNECTING ROD CAPS AND CHECK OIL CLEARANCE
(a) Using a punch or numbering stamp, mark the connecting rod and cap to ensure correct reassembly.
Remove the connecting rod cap nuts.
Using a plastic-faced hammer, lightly tap the connecting rod bolts and lift off the connecting rod cap.
HINT: Keep the lower bearing inserted with the connecting rod cap.
(b) Remove the connecting rod cap nuts.
(d) Cover the connecting rod bolts with a short piece of hose to protect the crankshaft from damage.
