4 Runner 2WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1992)
/Page-276008.png)
No. 3 Timing Belt Cover
22.
Remove the six bolts and No. 3 timing belt cover.
Delivery Pipe And Injectors
23.
On the RH side, remove two nuts and two spacers, then remove the RH delivery pipe with injectors and spacers. Remove the two spacers.
24.
On the LH side, remove two nuts and two spacers, then remove the LH delivery pipe with injectors and spacers. Remove the two spacers.
Water By-Pass Outlet
25.
Disconnect the No. 3 water hose from the water by-pass pipe, then remove the water by-pass outlet.
Intake Manifold
26.
Remove the twelve bolts, four nuts, intake manifold, and two gaskets.
Inspecting Intake & Exhaust Manifolds And Air Intake Chamber
27.
Maximum warpage of intake manifold is 0.10 mm (0.039 in). If warpage exceeds specifications, replace the intake manifold.
