Timing Belt Replacement for 1992 4 Runner 2WD V6-1805 2959cc 30L SOHC (3VZ-E)
/Page-286005.png)
(b) Remove the tension spring.
(c) Loosen the No.1 idler pulley bolt and shift it left as far as it will go.
(d) Temporarily tighten the set bolt and then release the timing belt tension.
(e) Remove the belt from each timing pulley.
15. Remove camshaft timing pulleys.
Using SST 09278-54012 to hold the pulley, remove the pulley bolt, timing pulley and match pin.
NOTICE:
^
Do not make use of the timing belt tension when removing or installing the pulley set bolts.
16. Remove No.1 idler pulley.
17. Remove crankshaft timing pulley.
If the timing pulley cannot be removed by hand, use two screwdrivers.
