4 Runner 2WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1992)
Neutral Safety Switch: Adjustments
Fig. 8 Adjusting Neutral Safety Switch
1. Raise and support vehicle.
2. Loosen neutral safety switch bracket bolt.
3. Position transmission shift lever into Neutral.
4. Align switch shaft groove with neutral base line, Fig. 8, then retighten switch bracket bolt.
5. Connect electrical connector to switch.
Fig. 8 Adjusting Neutral Safety Switch
1. Raise and support vehicle.
2. Loosen neutral safety switch bracket bolt.
3. Position transmission shift lever into Neutral.
4. Align switch shaft groove with neutral base line, Fig. 8, then retighten switch bracket bolt.
5. Connect electrical connector to switch.