4 Runner 2WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1992)
(a) Attach a washers and nut to the 4 serration bolts, then torque the nuts to install the serration bolts to the backing plate.
SST 09521-25011
(b) Remove the 4 nuts from the 4 serration bolts.
(c) Position SST on the backing plate with 4 nuts.
(d) Using a press, press out the rear axle shaft with bearing retainer from the backing plate.
(e) Remove the SST.
4. REMOVE OUTER OIL SEAL
-
Using a screwdriver, remove the oil seal.
5. REMOVE REAR AXLE SHAFT BEARING
-
Using SST and a press, press out the bearing from the backing plate.
SST 09223-56010,09608-35014 (09608-06100)