4 Runner 2WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1992)
/Page-801002.png)
3. REMOVE HUB SLEEVE NO.2 ASSEMBLY AND THIRD GEAR ASSEMBLY
(a) Using snap ring pliers, remove the snap ring.
(b) Using a press, remove hub sleeve No.2, synchronizer ring and 3rd gear.
(c) Remove the needle roller bearing.
4. REMOVE THE SHIFTING KEYS AND SPRINGS FROM HUB SLEEVE ASSEMBLY
Using screwdriver, remove the three shifting keys and two springs.
HINT: Hub sleeve No.1 and hub sleeve No.2.
