4 Runner 2WD V6-4.0L (1GR-FE) (2006)
5. REMOVE FRONT NO.2 SPEAKER ASSEMBLY
a. Disconnect the connector and remove the 2 bolts.
b. Remove the front No.2 speaker assembly from speaker mounting bracket No.1.
6. INSTALL FRONT NO.2 SPEAKER ASSEMBLY
a. Align a claw with the notch of the speaker mounting bracket No.1, and install the front No.2 speaker assembly with 2 bolts.
b. Connect the connector.
Stereo Component Speaker Assembly Front
REPLACEMENT
1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
HINT: Refer to the instructions for removal of the instrument panel sub-assembly.
2. REMOVE STEREO COMPONENT SPEAKER ASSEMBLY FRONT
a. Disconnect the connector.
b. Remove the 2 screws and stereo component speaker assembly front.
3. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Rear Speaker Assembly
REPLACEMENT
1. REMOVE REAR DOOR INSIDE HANDLE BEZEL LH
2. REMOVE REAR ARMREST ASSEMBLY LH
3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH