4 Runner 2WD V6-4.0L (1GR-FE) (2006)
Hood Shock / Support: Service and Repair
Disposal
DISPOSAL
1. DISPOSE OF HOOD SUPPORT ASSEMBLY
a. Horizontally fix the hood support on a vise, with the piston-rod pulled out.
b. With protection glasses on, gradually cut a part between A and B as shown in the illustration using a metal saw to gradually release the gas.
Dimension:
NOTE: Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that cutting tips of the metal saw
would scatter. Therefore, cover it with clothes or something.