toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Headliner|Specifications|Page 6451 > < Headliner|Specifications|Page 6449
Page 1
background image

Headliner: Service and Repair

ROOF HEADLINING ASSY

REPLACEMENT

HINT:

-

The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information
are included.

-

A bolt without torque specification is a standard bolt.

1. REMOVE TONNEAU COVER RETRACTOR SUB-ASSY
2. REMOVE REAR N0.2 SEAT LH (W/ 3RD SEAT)
3. REMOVE REAR N0.2 SEAT RH (W/ 3RD SEAT)
4. REMOVE N0.3 SEAT LEG COVER N0.2 (W/ 3RD SEAT)
5. REMOVE REAR N0.2 SEAT LOCK ASSY LH (W/ 3RD SEAT)

a. Remove the 2 bolts and seat lock.

6. REMOVE REAR N0.2 SEAT LOCK ASSY RH (W/ 3RD SEAT)

a. Remove the 2 bolts and seat lock.

7. REMOVE SEAT ANCHOR RAIL N0.4 (W/ 3RD SEAT)

a. Using a screwdriver, remove the 2 covers, 2 bolts and anchor rail.

HINT:  Tape the screwdriver tip before use.

8. REMOVE BACK DOOR WEATHERSTRIP
9. REMOVE DECK BOARD SUB-ASSY

a. Remove the 2 bolts and the deck board sub-assy.

10. REMOVE DECK BOARD ASSY

a. Remove the 2 bolts and the deck board assy.

11. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR

Headliner|Specifications|Page 6451 > < Headliner|Specifications|Page 6449