4 Runner 2WD V6-4.0L (1GR-FE) (2006)
a. Using SST, remove the brake actuator tube No.1 from the brake master cylinder.
SST 09023-00101
16. REMOVE BRAKE BOOSTER W/ACCUMULATOR PUMP ASSEMBLY
a. Using a screwdriver, remove the 2 plugs.
b. Remove the 2 screws and disconnect the wire harnesses from the master cylinder solenoid.
c. Using a screwdriver, remove the clip.
d. Remove the brake booster w/ accumulator pump assembly from the brake master cylinder.
e. Remove the 2 brake booster pump collars and the 2 brake booster pump bushes from the brake booster w/ accumulator pump assembly.