4 Runner 2WD V6-4.0L (1GR-FE) (2006)
/Page-820002.png)
a. Remove the look nut, adjusting nut, clip and disconnect the parking brake cable assembly No. 1 from the parking brake control pedal
assembly.
b. Remove the 2 nuts and 3 bolts from the parking brake cable assembly No.1.
c. Remove the lock nut, adjusting nut and parking brake cable assembly No.1 from the parking brake equalizer.
8. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.1
a. Install the parking brake cable assembly No. 1, temporary tighten the adjusting nut and lock nut.
