4 Runner 2WD V6-4.0L (1GR-FE) (2006)
/Page-1071002.png)
8. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
9. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
10. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2
11. REMOVE INSTRUMENT PANEL REGISTER ASSEMBLY NO.2
12. REMOVE AIR DUCT NO.2
a. Remove the 4 bolts and disconnect the Instrument panel safety pad sub-assembly.
b. Remove the 3 claw fittings and remove the air duct No.2.
13. REMOVE BLOWER ASSEMBLY
a. Release the 7 clamps and disconnect the connectors.
b. Remove the bolt and 2 screws and nut.
c. Release the claw fitting and remove the blower assembly.
14. REMOVE CLEAN AIR FILTER SUB-ASSEMBLY
