4 Runner 2WD V6-4.0L (1GR-FE) (2006)
1. Match the axis of the connector with axis of the pipe, and push in the connector until the connector makes a "click" sound. In case that the
connections is tight, apply little amount of new engine oil on the tip of the pipe.
2. After having finished the connection, check if the pipe and the connector are securely connected by pulling them.
3. Check for fuel leakage.
h. Observe these precautions when handling nylon tube.
CAUTION:
-
Be careful not to turn the connection part of the nylon tube and the quick connector when connecting them.
-
Do not kink the nylon tube.
-
Do not remove the EPDM protector on the outside of the nylon tube.
-
Do not close the piping with the nylon tube by bending it.
4. CHECK FUEL LEAK
a. Check that there are no fuel leaks after doing maintenance the fuel system.