4 Runner 2WD V6-4.0L (1GR-FE) (2006)
8.
Install the moon roof drive gear assembly the moon roof panel and the side garnish.
Moon Roof Glass Assembly Mounting Screw.
Torque: 4.0 N*m (41 kg*cm, 35 in*lbf)
Moon Roof Drive Gear Assembly Mounting Bolt.
Torque: 5.4 N*m (55 kg*cm, 48 in*lbf)
9.
Initialize the moon roof.
A.
Press the moon roof switch on the "TILT-UP" side and hold the button (the button may have to be held for up to 10 seconds).
^
The moon roof will lock in the fully tilted up position.
^
Then, the moon roof will move down a few millimeters.
B.
Release the switch - initialization is complete.
C.
Cycle the moon roof through all the operating modes (including auto-open and auto-close modes) to make sure the moon roof functions
properly.
10.
Install the connected map lamp assembly.