4 Runner 2WD V6-4.0L (1GR-FE) (2006)
Auxiliary Power Outlet: Service and Repair
Power Point Socket Assembly RR
REPLACEMENT
1. REMOVE TONNEAU COVER RETRACTOR SUB-ASSEMBLY
2. REMOVE BACK DOOR WEATHERSTRIP
3. REMOVE DECK BOARD SUB-ASSEMBLY
4. REMOVE DECK BOARD ASSEMBLY
5. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR
6. REMOVE DECK FLOOR BOX RH
7. REMOVE DECK TRIM COVER REAR
8. REMOVE DECK TRIM SIDE BOARD UPR RH
9. REMOVE SIDE TRIM BOX ASSEMBLY RH
10. REMOVE REAR DOOR SCUFF PLATE RH
11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
12. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
13. REMOVE POWER POINT SOCKET ASSEMBLY RR
a. Turn the socket in the circumference direction as shown in the illustration, disengage the claw between the socket and the power point socket
cover RR, and push out the socket to the room side.
b. Align the socket with the notch on the power point socket cover RR, remove the power point socket assembly RR to the room side.
14. INSTALL POWER POINT SOCKET ASSEMBLY RR
a. Align the socket with the notch on the power point socket cover RR, push the power point socket assembly RR into as hard as possible and
install it.