4 Runner 2WD V6-4.0L (1GR-FE) (2006)
3. SKID CONTROL ECU
a. Check the skid control ECU harness side connector (S28).
1. Disconnect the connector (S28) from the skid control ECU.
2. Measure the resistance according to the value(s) in the table.
4. STEERING ANGLE SENSOR
a. Check the harness side connector (S11) of the steering angle sensor.
1. Disconnect the connector (S11) from the steering angle sensor.
2. Measure the resistance according to the value(s) in the table.