4 Runner 2WD V6-4.0L (1GR-FE) (2006)
/Page-625001.png)
Accelerator Pedal: Service and Repair
REPLACEMENT
1. REMOVE ACCELERATOR PEDAL ROD ASSY
a. Disconnect the accelerator pedal connector.
b. Remove the 2 nuts and the accelerator pedal assy.
2. INSTALL ACCELERATOR PEDAL ROD ASSY
NOTE:
-
Avoid physical shock to the accelerator pedal assy.
-
Do not disassemble the accelerator pedal assy.
a. Install the accelerator pedal assy with the 2 nuts.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
b. Connect the accelerator pedal connector.
