4 Runner 2WD V6-4.0L (1GR-FE) (2006)
5. DISCONNECT WATER BY-PASS HOSE NO.5
6. DISCONNECT WATER BY-PASS HOSE NO.4
7. REMOVE THROTTLE W/MOTOR BODY ASSY
a. Disconnect the throttle motor connector.
b. Remove the 4 bolts, throttle w/ motor body and gasket.
8. INSTALL THROTTLE W/MOTOR BODY ASSY
a. Install a new gasket and the throttle w/ motor body with the 4 bolts.
Torque: 11 N.m (112 kgf.cm, 9 ft.lbf)
b. Connect the throttle motor connector.
9. CONNECT WATER BY-PASS HOSE NO.4
10. CONNECT WATER BY-PASS HOSE NO.5
11. INSTALL AIR CLEANER ASSY
a. Install the air cleaner with the 2 bolts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
12. CONNECT VENTILATION HOSE NO.2
13. INSTALL V-BANK COVER
a. Install the V-bank cover with the 2 nuts.
Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)
14. ADD ENGINE COOLANT