4 Runner 2WD V6-4.0L (1GR-FE) (2006)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Tire Pressure Monitor Receiver Assembly
TIRE PRESSURE MONITOR RECEIVER ASSEMBLY (From August, 2003)
REPLACEMENT
1. DISCONNECT BATTERY NEGATIVE TERMINAL
(a) Disconnect the negative terminal.
2. REMOVE REAR NO.2 SEAT ASSEMBLY LH
3. REMOVE REAR NO.2 SEAT ASSEMBLY RH
HINT: Remove the RH side following the same procedures as with the LH side.
4. REMOVE ROOF HEADLINING ASSEMBLY