4 Runner 2WD V6-4.0L (1GR-FE) (2006)
5. REMOVE TIRE PRESSURE MONITOR RECEIVER ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 bolts and receiver assembly.
6. INSTALL TIRE PRESSURE MONITOR RECEIVER ASSEMBLY
(a) Install the receiver assembly with the 2 bolts.
Torque: 6.8 Nm (69 kgf-cm, 60 in.-lbf)
(b) Connect the connector.
7.
INSTALL ROOF HEADLINING ASSEMBLY
8. INSTALL REAR NO.2 SEAT ASSEMBLY LH
9. INSTALL REAR NO.2 SEAT ASSEMBLY RH
HINT: Install the RH side following the same procedures as with the LH side.
10. CONNECT BATTERY NEGATIVE TERMINAL
11. REGISTRATION OF TRANSMITTER ID
12. INSPECT TIRE PRESSURE WARNING SYSTEM
SST 09843-18040
13. PERFORM INITIALIZATION