4 Runner 2WD V6-4.0L (1GR-FE) (2006)
9. Unzip the left and right side back seat cover.
10. Remove the 2 front seat headrest supports.
11. Remove the seatback cover together with pad by removing the hog rings nut and seatback cover bracket.
NOTE
Disconnect the seat heater connector (if equipped).
12. Remove the side airbag assembly.
A. Remove the 2 nuts from the side airbag assembly.
B. Remove the 1 clip holding the airbag wire harness.
NOTE
The remaining 5 clips holding the wire harness will be removed when installing the new airbag and wire harness.
13. Install the NEW side airbag assembly.