4 Runner 2WD V6-4.0L (1GR-FE) (2006)
f.
Turn SST 1-B, and remove SST 1-A and B.
g. Remove the pulley nut and pulley.
2. REMOVE GENERATOR REAR END COVER
a. Place the generator on the pulley.
b. Remove the 3 nuts and rear end cover.
3. REMOVE TERMINAL INSULATOR
4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY
a. Remove the plate seal.
b. Remove the 2 nuts and brush holder.
c. Remove the plate seal.
5. REMOVE GENERATOR COIL ASSEMBLY